GENBA SOPANRAO MOZE TRUST'S

GENBA SOPANRAO MOZE INSTITUTE OF TECHNOLOGY (POLYTECHNIC)

(Affiliated to MSBTE Mumbai, Approved by AICTE and Govt. of Maharashtra)
ADDRESS- 25/1/3, Balewadi, Tal-Haveli, Dist-Pune. PINCODE-411045

MSBTE CODE

0957


DTE CODE

6430

MECHANICAL DEPARTMENT


Welcome to the Mechanical Engineering Department

The Mechanical Engineering Department was established in 2008-2009. The Department has intake of 120 students. Mr. Rakesh Kumar is the Head of Department supported by well qualified staff. This department has produced many qualified engineers for mechanical industry.
The Department has well Equipped Workshop, Fluid Mechanics Lab, Industrial Fluid Power Lab, Thermal Engg. Lab, Power Engg. Lab, Theory of Machine Lab, CAD/CAM/CAE Lab, Metrology & Quality Control Lab, Automobile Lab and Refrigeration and Air-conditioning Lab, Measurement & Control Lab.


HOD DESK


Mechanical branch is the core branch of Engineering. Students of Mechanical Engineering are preferred in various industries in the areas such as Automobile, Thermal, Fluid application, manufacturing as well as software industries. With the rapid rate of expansion in the industrial sector, the employment potential for mechanical engineers is very high.
In addition to the curriculum, our faculty interacts with the students for personality as well as entrepreneurship development. Students have good exposure & interaction with the reputed industries to bridge the gap between theoretical & practical knowledge.


Mr. Rakesh Kumar

B.E. Mechanical (Heat Power Engg.)
mrakesh02@gmail.com

VISION


Striving Continuously In Pursuit of excellence to be admire globally.

MISSION


Imparting the Skills of Students in order to ignite the minds, to cast them for the Future Professionals and young dynamic role.With the help of innovation research and creativity support government's make in India .

MECHANICAL FACULTY DETAILS

Name: Mr. Rakesh Kumar
Designation : Head of Department
Qualification : BE Mechanical (Heat Power Engg.)
Mail-Id : mrakesh02@gmail.com
Experience: Teaching- 5 Years,Industry: 1 Years
SPECIALIZATION : MECHANICAL.


Name: Mr. Chaudhari Dinesh E.
Designation : Lecturer
Qualification : ME (pursuing) Mechanical (Heat Power Engg.)
Mail-Id : CHAUDHARI DINESH E.
Experience: Teaching- 5 Years,Industry: 3 Years
SPECIALIZATION : Heat Power .

[No. of Paper Published: National Journal- 1]


Name : Mr. Shyam Devidas pune
Designation : Lecturer
Qualification : BE Mechanical
Mail-Id : shyampune98@gmail.com
Experience: Teaching : 3 years
SPECIALIZATION : MECHANICAL.


NAME : Mr. Kalpesh D. Bopate
Designation : Lecturer
Qualification : ME (pursuing) Mechanical
Mail-Id : kalpeshbopate@gmail.com
Experience: Teaching : 0.6 Month, Industrial : 1 years
SPECIALIZATION : HEAT POWER.

[No. of Paper Published: National Journal - 1]



NAME : Ms.Vishwal Ashok Kawale
Designation : Lecturer
Qualification : ME (pursuing) Mechanical
Mail-Id : vishwalkawale@gmail.com
Experience: Teaching : 1 years
SPECIALIZATION : DESIGN.


Name: Mr.Gupta Sunil Nandlal
Designation : Lab Assistant
Qualification : BE Mechanical
Mail-Id : guptasunil953@gmail.com
Experience: Industrial : 1 year
SPECIALIZATION : MECHANICAL.

LAB DETAILS


THEORY OF MACHINE LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Tangent Cam, Plate Cam, Cylindrical Cam, Translating Cam, Multiplate Clutch, Plate Clutch, Conical Clutch, Single Shoe Brake, Band Brake, Claw Clutch, Reciprocating Engine Mechanism, Porter Governor, Hartnell Governor, Loaded Governor, Gear Tooth Profile Generator, End Cam, Crank &Slotted Link Mechanism, Disc Brake, Internally Expanding Brake, Scotch Yoke Mechanism, Oscillating Cylinder Mechanism, With Worth Quick Return Mechanism, Inversion Of Double Slide Crank Mechanism, Oldham’s Coupling, Centrifugal Clutch, Inversion Of Single Slide Crank Mechanism, Belt Dynamometer, Universal Vibration Testing Machine, Rope Brake Dynamometer, Balancing Of Several Masses Rotating In A Single Plane Test Rig

LAB INCHARGE : Mr.Rakesh Kumar..



METROLOGY & QUALITY CONTROL LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Vernier Caliper, Dial Gauge, Vernier Caliper Digital, Micrometer, Slip Gauges, Bevel Protractor, Filler Gauges Surface Plate, Vernier Caliper Digital, Angle Gauge Set 13 Pieces, Profile Projector, Auto Collimator, Go No-Go(Plug, Ring, Snap) Gauges, Bourdon Tube Pressure Gauge, Strain Measurement Module, Temperature Measurement Module, Thermistor Module, Speed Measurement Module, LVDT Trainer, Level Measurement

LAB INCHARGE :Mr. Kalpesh Bopater



POWER ENGINEERING LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Refrigeration Test Rig, Four Stroke Single Cylinder Petrol Engine With Rope Brake Dynamometer, Fusible Plug Model, Two Stroke Air Compressor Test Rig, 4-Stroke 4-Cylinder Petrol Engine, Condenser Model, Evaporator Model.

LAB INCHARGE : Mr. Sidhharth Dongre



THERMAL ENGINEERING LAB

DESCRIPTION :
Area of Lab : 66 sq. metre
Solar Flat Plate Collector Used For Water Heating , Photo Voltaic Panel, Box Type Solar Cooker, Babcock & Wilcox, Cochran Boiler, Loffler Boiler, Lancashire Boiler, Thermal Conductivity Of Metal Rod, Stefan Boltzmann Apparatus, Water Gauge Model

LAB INCHARGE : Mr. Sidhharth Dongre



REFRIGERATION & AIR CONDITION LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Domestic Refrigerator Test Rig, Window Air Conditioner Test Setup, Hermetically Sealed Compressor, Ice Plant Test Rig, Water Cooler Test Rig, Window Air Conditioner.

LAB INCHARGE : Ms.Snehal Bachhav



AUTO CAD LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Lenovo think center Lenova Think center Intel (R) core (TM)i3-3220 CPU @3.30 Ghz ,2GB RAM,500 GB HDD, Lenova Monitor-17”5 Total Computer- 20 Nos. Printer- Canon LBP2900B

LAB INCHARGE : Mr. Shyam pune



INDUSTRIAL FLUID POWER LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Pneumatic Trainer, Hydraulic Trainer, Dead Weight Safety Valve, Lever Safety Valve, Feed Check Valve, Blow Of Cock, Spring Loaded Safety

LAB INCHARGE : Mr. Dinesh Chaudhari



FLUIDS MECHANICS LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Bourdon Pressure Gauge, Dead Weight Pressure Gauge, Orifice Meter Test Rig, Reciprocating Pump Test Rig, Pelton Turbine Test Rig 1HP, Venturimeter Apparatus, Calibration Of Rotameter , Losses In Pipe Friction App., Losses In Pipe Fitting Apparatus, Bernoulli’s Apparatus, Centrifugal Pump Test Rig 2 HP Constant Speed Type

LAB INCHARGE : Mr. Dinesh Chaudhari



AUTOMOBILE ENGINEERING LAB

DESCRIPTION :
Area of Lab : 73 sq. metre
Synchromesh Gear Box, Differential Gear Box, Charging System, Diaphragm Spring Type Clutch, Single Plate Coil Spring Clutch, Old Working Model Two Wheeler Engine, Working Model Of Suspension System, Working Model Of Hydraulic Brake, Radiator Model, Conical Friction Clutch, Drum Brake

LAB INCHARGE : Mr.Rakesh Kumar.


MECHANICAL EVENT DETAILS

INDUSTRIAL VISIT

SUGAR FACTORY VISIT






SOLAR WATER HEATING SYSTEM VISIT on DATE: 5th May 2015




ST WORKSHOP, DAPODI on Date: 23rd Feb. 2015




KATRAJ DAIRY VISIT on DATE: 30th Jan 2015








GUEST LECTURE

DATE: 4th March 2015

SUBJECT : Seminar on Entrepreneurship Development








DATE: August 2015

SUBJECT : Seminar on Careeer Guidence








TREE PLANTATION






TEACHERS DAY